Jump to content

The QuadNet Array - D-STAR and DMR Done Your Way!


Recommended Posts

Our Mission Statement

We are an open ircDDB routing network that doesn't require registration. We contend that valid Amateur Radio license is enough to operate on the QuadNet2 USA IRC Network. We do not require a special club or repeater call sign for use on the network. As long as the call sign is valid and being legally used, we fully support your use of dongles, hotspots and repeaters (both homebrew and ICOM) on the QuadNet network. The purpose of QuadNet is to support routing. Routing is an alternate method of connecting to other D-Star users. Routing does NOT require your gateway to know the IP addresses of reflectors or repeaters to which you want to connect. You uses special routing callsigns in the UR field (YOURCALL) of your radio (instead of the usual CQCQCQ) and QuadNet figures out how to get your signal to the proper destination.

For a long time, it has been understood that you can't route when you are using a mobile rig (like a hot-spot that uses a cellphone for its Internet connection) because routing uses port 40000. Well, here at QuadNet, we have solved that. You can Group Route to any Smart Group, whether you are operating from your home, or you are operating a mobile rig!

QuadNet Nets

The following nets are held on the QuadNet Array:

The QCWA D-STAR Net happens every Sunday night at 5:00 PM US eastern time (21:00 UTC DST; 22:00 UTC standard). Net control will be Daryl, WX4QZ. One does not have to be part of the Quarter Century Wireless Association to check in.

The Young Operators Digital Voice Net happens every Sunday night at 7:00 PM US eastern time (23:00 UTC DST; 00:00 UTC standard). Net control will be Danielle KE8JNU (10 years old, Extra class operator). This net is geared toward topics of interest for school age young people, either licensed or 3rd party with a licensed operator present. But even though this is focused on younger operators, all are welcome to participate. The goal is to enhance discussion of ideas while fostering the development of operating principles and techniques for young people.

The Amateur Radio RVer Net happens every Sunday night at 9:30pm ET (01:30 UTC DST, 02:30 UTC standard). We are going to try a weekly net for those amateur radio operators who also enjoy the RV lifestyle or for those thinking about it and needing more information about the RV lifestyle. The original net was started by Eric Udell, KN4MCE on Brandmeister DMR TG 31652. Seeking a wider audience we were granted a time slot on the Quadnet Array. The Brandmeister DMR TG 31652 will still be available for one on one QSOs between RVers. Sunday evening was selected since many RVers are already parked and making plans for upcoming trips. The net forum will emphasize amateur radio installations and operations pertinent to RVers. We will discuss travel suggestions as well as weather and road hazard information pertinent to RVers. With respect to RVs, discussions will be generic and not brand specific. RV lifestyle and general maintenance tips will be discussed. As a resource, we do participate on the Amateur Radio RVers Facebook page.

The Amateur Astronomy Digital Voice Net happens every Wednesday evening at 9:00 PM US eastern time (01:00 UTC DST; 02:00 UTC standard). Net control will be Jason N8XE. This net is focused on amateur astronomy topics such as observing, imaging, telescope making, telescopes, binoculars, an other general astronomy topics. If you are an active amateur astronomer, or just enjoy looking up at the heavens, please join the conversation. The first Wednesday of every month will focus on those who are new to amateur astronomy or looking to get started.

The Ham Nation After Show Net happens every Wednesday evening at 10:00 PM US eastern time (02:00 UTC DST; 03:00 UTC standard). Any and all licensed amateur radio operators are welcome to join us to talk about topics covered during the show. Net control stations are Andrew WA8LIV, Craig KC8VJK and Steve K8SAS. Ham Nation Website

The K5TAL - TALARC Net happens every Thursday evening at 7:00 PM US central time (23:00 UTC DST; 00:00 UTC standard). K5TAL is the club call of American Legion Post 1992, Gautier-Vancleave, MS. TALARC is the American Legion Amateur Radio Club. All hams are invited to check into the net and you do not have to be a veteran to check in. Operated as a means to communicate with other vets/hams regardless of the DV mode they have.

The Trains Net happens every Friday at 8:00 PM eastern time (00:00 UTC DST, 01:00 UTC standard). Net control will be Daryl, WX4QZ. It will discuss anything and everything related to trains and railroading, along with a railroad trivia question.

The Multi Mode Digital Voice Net run by Jeff VE6DV happens every Saturday at 4:00 PM US mountain time (22:00 UTC DST; 23:00 UTC standard). If you can't make it to the net live, you can catch a recording of the previous weeks net at Soundcloud. If you are a Facebook user, check out the D-STAR Users group and join in on the discussion there.

The Food Net happens the first Saturday of the month at 8:00 PM US eastern time (00:00 UTC DST; 01:00 UTC standard). Net control will be Daryl, WX4QZ. H.A.M. stands for "Have Another Meal", and you don't call us late for dinner!! And considering both Field Day operations, and hamfests, you need to keep the operators and visitors happy, and not hungry.

The QuadNet Array

The QuadNet Array consists of the following linked reflectors, routed Smart Groups, and DMR:

QuadNet Smart Groups

  • DSTAR1 located in New York
  • DSTAR2 located in San Francisco
  • DSTAR3 located in Ohio
  • DSTAR4 located in Alabama

D-STAR Reflectors:


YSF Reflector

Instructions for using the QuadNet Array can be found on the getting started page.

QuadNet Array

Some Important Preliminaries

Be sure to look at the routing FAQ for a more detailed description of Routing. Make sure you get to the bottom line: If you don't want to do routing, you don't need QuadNet.

Refer to the getting started page for detailed configuration information.

Please only connect one system to QuadNet at a time. Also refrain from running multiple systems from the same IP address. Think of the QuadNet network as a telephone directory that has a unique IP address for everyone (and everything) that is logged in. If two different logins point to the same IP address your end will probably have trouble getting the addressed data to the correct node. Also, if a user has multiple logins from different IP addresses, the QuadNet server won't necessarily route your data to the proper IP address.

Finally, it has been reported that some gateway software can inadvertently send incoming routed data to linked systems and this can be a real problem. In the routing world of QuadNet, if you need to link to a reflector, you should instead route to a group that is linked to the desired reflector. For example QNET20 C is always linked to XRF757 C. It is always a great idea to unlink from all reflectors and repeaters when you are using routing!

Supported devices

Homebrew D-STAR Repeaters

  1. ICOM D-STAR Repeater stacks
  2. DV Dongle
  3. ThumbDV™ and PiDV™
  4. DVAP Dongle
  5. DVRPTR V1 (no longer in production), V2 and V3
  6. DVMega
  7. URDC
  8. All Pi-Star Based Hardware

New capabilities are coming out on almost a daily basis.

Software compatible with Quadnet

There are far too many packages to list here. Google or Bing can be your friend in finding new packages coming out all the time. If you are new to this, we can recommend PiStar. PiStar supports a variety of small, single board computers, including the popular Raspberry Pi as well as most of the devices listed above. With a Web interface, PiStar is easy to configure and run. There are also links to YouTube videos on the PiStar Website showing how to set up and use PiStar. PiStar with a DVMega is an extremely popular combination and give you a true multimode repeater/hot spot. Routing on D-STAR is fully supported for both the DStarRepeater and the MMDVMHost!

Of course you can build your own system from the ground up. If you are interested in a multimode repeater/hot spot, a great place to start is Jonathan Naylor's MMDVM Git repository. This repository is in very active development and only experienced builders will be able to complete all the requirements necessary to build a system from scratch. A DStar-only repeater or hot spot can be built from Jonathan's older, but still popular DStarRepeater+IRCDDBGateway software and is available on Hans DL5DI's OpenDV repository. Again this takes some skill and tinkering to complete.

Our own N7TAE has a new system called QnetGateway that supports MMDVM and that can be easily built on a Raspberry Pi. see the N7TAE QnetGateway repository. If you have never built up a system from scratch before, this is a fun place to start, and, of course, QnetGateway fully supports routing! To gain inside information about QnetGateway, join the QnetGateway at groups.io.

The QuadNet Group also offer help with your setup or help with troubleshooting when problems occur. The contact uspage has several ways for you to reach out.

73 and have fun with D-STAR!

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Ham Mega Pad (XXXL)

Ham Word Cloud Pad (XL)

Ham Codes, Signs, Words (Medium)

Ham Band Edges mousepad (Small)

Ham Alliance

Ham Alliance - Billboard - 970*250px

  • Create New...